If your DVD player does not work properly or you do not get a disk error, you may need to clean the player. The reader is a laser scanner that reads your DVDs and lets you access the content. To connect the DVD player is working again, just to cancel the laser scanner following points really easy to clean.
Before these steps leaves us exactly what we have to look at the bottom. We basically have the DVD and head out electroniccase, the player will have easy access to real-laser pick-up allows us to clean properly. After cleaning, it's just a matter of implementing what is left.
Before you follow these steps ensures that the laser pick-up is the real problem. Adds a couple of DVDs in the DVD player to confirm the problem is really the goal. If some other DVDs, but the problem is obviously not the player. If no work is available, there are a variety of reasons why a player is notno longer works properly. But it is very likely that the laser pick-up is too dirty.
What do you clean the DVD player
Cleaning discs Screwdriver Cotton swabs Isopropyl alcohol Flashlight (optional)
To clean laser DVD Player
Step # 1 - Disc Lens Cleaner - The first thing to do is to obtain or try to borrow the cleaning disk and clean the laser scanner. This lens cleaner discs usually have a great job of cleaning the laserPick-up. Next, try to watch a DVD extra, if the problem is solved or not, and whether to adopt further measures to clean, to collect by hand or not. If the player still does not work as in step 2
Step # 2 - Remove the outer casting - Disconnect the player from the mains and remove the screws from the external merge. You will see the plastic head of the DVD player, electronics can be present for them.
Step # 3 - Open the DVD - the next thing we needdo is get your head with plastic electronics from the DVD player. In some cases, the plastic shell of a small head has a different casting attached to it. To remove, simply connect the power supply, turn off the DVD player to open the player, the DVD player off and unplug the AC adapter. Well, quite simply, the release of small stream outward from the compartment.
Step # 4 - Removal of the Head DVD - The next head of solving the DVD with the electronics on the motherboard. Thanks to Stage 3you can easily remove the head from the main board and unplug all cables from the head to the main board.
Step # 5 - Removing Head of Electronics - now you have the DVD head in his hands with the mechanism of plastic and a current clamp and electronics. Remove the clamp. Look for the laser pick-up current has a blue tint to him. If you have problems, have a laser-scanner, you go to a no reflections of light appear to acknowledge. If you watch nowand easy access to the actual laser-scanner to clean already, no need for electronics from head to solve. Otherwise, it is sufficient to resolve the address of your head and then follow step 6 on how to properly clean the laser scanner.
Step # 6 - Cleaning the laser pick-up - Well, since you have easy access to the laser scanner, use a cotton swab and isopropyl alcohol and clean the lens. Use the other end of the swab to dry it. Now you wait a few minutes andlet dry.
Step # 7 - put it all together - now that the laser lens is clean again, sometimes we can put everything back together and test the performance of the lens. Even in this case the electronics in the head, connected to the terminal attached to the head back on board, all cables that attach to the motherboard again, and connect the AC adapter to test a couple of DVDs. Turn insert the DVD player, DVD player and test the efficiency drive. If 'DVDs can effectively clean your DVD player. Otherwise, follow the steps again and try to clean the laser pick-up a little 'deeper.
Step # 8 - Attach the external Casting - Putting the power back, unplug the AC adapter to connect all the cast back to the external DVD player.
On your DVD player is now ready to be cleaned and reused!
0 comments:
Post a Comment